Akuvox
Showing 33–64 of 101 results
-
Akuvox
Akuvox E21A SIP Emergency Phone with 3G / 4G option
E21 Audio Emergency / Safety Phones are designed for use in lifts, parks, school campuses, tunnels, highways, car parks etc. For applications where it is not possible / feasible to run cables, these intercoms can be 3G enabled to work over the Cellular network.
- Panic Button for Emergency Calls
- Anti Vandal and IP 65 Weather Proof – 316 grade stainless steel construction
- Flush mount installation
- IEEE802.3af PoE
- 2 x Input and 2 x output relays for alarm or door opening
- SIP enabled for easy integration with IP Phone Systems
E21 can be mounted on wall surface or in wall flush mounted, please browse on Accessories tab below to order.
For 4G enabling the device, please contact us for more information.
-
Akuvox
Akuvox E21V SIP Safety Intercom with Camera
E21V SIP Safety Intercom with Camera is designed for use in lifts, parks, school campuses, tunnels, highways, car parks etc. For applications where it is not possible / feasible to run cables, these intercoms can be 4G enabled to work over the Cellular network.
- Panic Button for Emergency Calls
- Camera with IR LEDs for night viewing
- Anti Vandal and IP 65 Weather Proof – 316 grade stainless steel construction
- Flush mount installation
- IEEE802.3af PoE
- 2 x Input and 2 x output relays for alarm or door opening
- SIP enabled for easy integration with IP Phone Systems
E21 can be mounted on wall surface or in wall flush mounted, please browse on Accessories tab below to order.
-
Akuvox
Akuvox EC33 IP Based Elevator Controller
- High performance 32bit CPU processor
- Standard 10/100M TCP/IP communication
- Big capacity flash chip, 20,000 card holders and 100,000 records
- Each panel support 32 outputs and can connect a expansion panel to reach 64 outputs
- One RS485 port for connecting expansion panel
- Supports emergency door release input to realize fire alarm linkage or elevator’s normal usage if emergency
- Supports 1 Wiegand reader with Wiegand 26/34 protocol
- Support working with Akuvox intercom devices by HTTP mode
-
Akuvox
Akuvox IT80 SIP Touch Screen Monitor
- 7″ Touch screen with slim profile and small footprint
- Supports both IP based calling and SIP Protocol
- Powered by PoE or external source
- Built in Microphone and Speaker
- 5 Programmable push buttons
- Supports Video preview feature
Akuvox IT80 Touch Screen Monitor is available in 2 colours, please select below.
-
Akuvox
Akuvox IT82R / IT82W touch screen monitor with Wi-Fi option
7inch touch screen monitor with Android OS
- SIP v2.0 compliant works with all SIP based IP PBX systems
- Works with Akuvox & 2N Door intercoms through SIP Server or P2P
- 7 inch touch screen TFT LCD, 1024 x 600 HD Resolution
- Thin profile with sleek wall mount bracket
- Supports Video Preview and Visitor Snapshot Capture
- 2 x 10/100Mbps Ethernet ports, with one PoE 802.3af
- Optional Wi-Fi interface on IT82W
- Android Operating System allows 3rd part apps to be loaded
- Integrated Mic and Speakers.
- Optimized for Video Intercom applications with Door/ Gate Open one touch button, Web relay activation.
- Supports 3rd party Security Camera Streaming and Home Automation Apps
Akuvox IT82 Touch Screen Monitor is available in 2 versions please select below.
-
Akuvox
Akuvox MD06 / MD12 In Wall Flush Box
Akuvox MD06 / MD12 In Wall Flush Mounting box is designed to house the Expansion Modules for Akuvox R20K and Akuvox R20B IP Door Phones.
Akuvox MD06 / MD12 In Wall Flush Box comes with option to house 2 or 3 extension module units. Please select required option from drop down menu.
-
Akuvox
Akuvox MD06 Name Tag Extension Module
- Name tag extension module compatible with R20K / R20B
- Six call buttons with name tags for easy calling
- IP65 rated for outdoor installation
- Backlight compensation behind the name tag buttons
- User-friendly and expandable
- In-wall installation
-
Akuvox
Akuvox MD12 Name Tag Extension Module
- Name tag extension module compatible with R20K / R20B
- 12 call buttons with name tags for easy calling
- IP65 rated for outdoor installation
- Backlight compensation behind the name tag buttons
- User-friendly and expandable
- In-wall installation
-
Akuvox
Akuvox NC-2 IP over 2 Wire Converter
-
Supports PoE Output
-
Long transmission distance via 2-wire cable
-
Support for paired use or use with Akuvox NS-2
-
Powerd by 48VDC unit or NS-2
-
-
Akuvox
Akuvox NS-2, 2 Wire IP Network Switch
- Support network and power supply for R20A-2 or C313W-2 through 2-wire cable
- Support multi-level cascade through 2-wire cable
- Connects up to 6 pcs of Akuvox 2-wire IP intercom devices
- Super long transmission distance via 2-wire cable
- Powerd by 48VDC or 24VDC power supply unit
- Rail mounting installation;
-
Akuvox
Akuvox NX-2 Ethernet to 2 Wire Adaptor Kit
- Supports PoE input
- Long transmission distance via 2 wire cable
- Supports paired use with Akuvox NC-2
- Powered by PoE
-
Akuvox
Akuvox R20 intercom rain cover for in wall / on wall models
Akuvox R20 intercom Rain cover for in wall / on wall mounted models can go a long way in enhancing the life and performance of the system.
Akuvox R20 intercom Rain cover for in wall / on wall mounted models not only protect the system but also add aesthetic value to the installation.
-
Akuvox
Akuvox R20A Flush Mount Kit
Akuvox R20A Flush Mounting Kit is designed for in wall / flush mounting of R20A Intercom into brick walls.
-
Akuvox
Akuvox R20A-2, 2 Wire SIP Video Door Phone with Camera, Card Reader
- Vandal resistant body, with a flush button
- Two-pin wire for power supply and network access
- Wide-angle camera: 110º (H), 58º (V)
- IC/ID Card Reader embedded
- Two-way audio communication over IP networks with Echo Cancel & Noise suppression
- H.264 video compression
Please note Akuvox NS-2, 2Wire IP PoE switch is required to operate this product, please scroll down to accessories for details.
-
Akuvox
Akuvox R20B Multi-tenant Video Intercom with upto 5 buttons
Multi tenant intercom with card reader
- Full metal Aluminum vandal resistant body
- Option for 2 / 3 / 4 / 5 call buttons
- 3 MP Wide-angle camera
- Supports Video Preview and Visitor Snapshot to email
- PoE (IEEE802.3af, Power-over-Ethernet) or 12V DC
- High intensity LEDs for night viewing
- 13.56 MHz /125kHz RFID Card Reader
- IP 65 water and dust resistance rating – ideal for Australian Conditions
- 2 x Integrated door lock control relays
- Two-way audio communication over IP networks with Echo Cancel feature
- Complies with SIP standard for easy integration with SIP based PBX Systems
- Supports visitor snapshot to email
- Supports ONVIF standard for easy integration with NVR
Akuvox R20B can be flush mounted inside the wall using the optional in wall kit, please select from accessories tab below.
-
Akuvox
Akuvox R20K / R20B Rain cover – In wall / On wall models
Akuvox R20K / R20B intercom Rain cover for in wall / on wall mounted models can go a long way in enhancing the life and performance of the system.
Akuvox R20K / R20B intercom Rain cover for in wall / on wall mounted models not only protect the system but also add aesthetic value to the installation.
-
Akuvox
Akuvox R20K Flush Mount Kit
Akuvox R20K Flush Mount Kit is designed for in wall mounting of R20K & R20B Intercoms.
-
Akuvox
Akuvox R20K- 2 Two wire Video Intercom with Card Reader & Keypad
- Two-pin wire for power supply and network access
- Wide-angle camera: 110º (H), 58º (V);
- IC/ID Card Reader & Keypad embedded;
- Two-way audio communication over IP networks with Echo Cancel & Noise suppression;
- H.264 video compression;
- Keypad supports pincode for keyless entry
- IP 65 water and dust resistance rating – ideal for Australian Conditions
- 2 x Integrated door lock control relays
- Full metal Aluminum vandal resistant body
Please note Akuvox NS-2, 2Wire IP PoE switch is required to operate this product, please scroll down to accessories for details.
Akuvox R20K -2 comes with surface mount bracket, Please browse Accessories tab below to order in wall / flush mounting box, Rain Cover etc.
-
Akuvox
Akuvox R23 Intercom Rain cover
Akuvox R23 intercom Rain cover for on wall mounted models can go a long way in enhancing the life and performance of the system.
Akuvox R23 intercom Rain cover for on wall mounted models not only protects the system but also add aesthetic value to the installation.
-
Akuvox
Akuvox R23C SIP Intercom with Card Reader, PoE.
- Aluminum vandal resistant body
- PoE (IEEE802.3af, Power-over-Ethernet)
- RFID Reader
- IP 65 water and dust resistance rating – ideal for Australian conditions
- Integrated door lock control relays
- Two-way audio communication over IP networks with Echo Cancel feature
- Complies with SIP standard for easy integration with SIP based PBX Systems
- Easy to install surface mount unit comes with mounting bracket
- Can integrate with IP cordless Phones
To order Rain Cover, etc. Please scroll down to Accessories Tab
-
Akuvox
Akuvox R23P SIP Intercom, PoE
- Aluminum vandal resistant body
- PoE (IEEE802.3af, Power-over-Ethernet)
- IP 65 water and dust resistance rating – ideal for Australian conditions
- Integrated door lock control relays
- Two-way audio communication over IP networks with Echo Cancel feature
- Complies with SIP standard for easy integration with SIP based PBX Systems
- Easy to install surface mount unit comes with mounting bracket
- Can integrate with IP cordless phones
To order Rain Cover, etc., please scroll down to Accessories tab.
-
Akuvox
Akuvox R26 Intercom Rain cover for on wall models
Akuvox R26 intercom Rain cover for on wall mounted models can go a long way in enhancing the life and performance of the system.
Akuvox R26 intercom Rain cover for on wall mounted models not only protects the system but also add aesthetic value to the installation.
-
Akuvox
Akuvox R26B Multi-tenant Video Intercom with 5 buttons
Multi tenant intercom with card reader
- Full metal Aluminum vandal resistant body
- 3 MP Wide-angle camera
- Supports Video Preview and Visitor Snapshot to email
- PoE (IEEE802.3af, Power-over-Ethernet) or 12V DC
- High intensity LEDs for night viewing
- 13.56 MHz /125kHz RFID Card Reader
- IP 65 water and dust resistance rating – ideal for Australian Conditions
- 2 x Integrated door lock control relays
- Two-way audio communication over IP networks with Echo Cancel feature
- Complies with SIP standard for easy integration with SIP based PBX Systems
- Supports visitor snapshot to email
- Supports ONVIF standard for easy integration with NVR
Akuvox R26B is available in both flush and surface mount options, please select from menu below.